URG-2000-22FB滤膜夹托

URG滤膜托夹设计用于固定37毫米过滤介质，其设计可确保样品的完整性，并可方便地往返实验室。不锈钢支撑屏幕采用Teflon®涂层，以防止屏幕和过滤介质之间发生反应。新型O形圈可防止O形圈与过滤介质接触，从而形成防漏密封。

设计用于容纳37毫米过滤介质

＃30入口处的外螺纹允许直接连接环形剥离器，歧管，旋风器和其他URG组件

1/4英寸（5.7厘米）最大外径

URG-2000-22FB：

3 1/2“（8.9 cm）高度（2层滤膜）

0.44磅（0.2千克）

不锈钢支撑屏幕是Teflon©涂层，以防止屏幕和过滤介质之间的反应

设计确保样品完整性，并允许轻松运输到实验室

快速安装在出口处，便于连接真空泵（URG-2000-22F，如图所示）

＃30外螺纹用于连接URG组件，如PUF采样器（URG-2000-22FB，如图所示）

使用新型O形圈布置防止O形圈和过滤介质接触并形成防漏密封

可提供1或2个层滤膜

URG-2000-22FB: #30 Male Thread at Inlet and #30 Female Thread at Outlet

The URG filter holder designed to hold 37mm filter media features a design that ensures sample integrity and allows for easy transportation to and from the lab. The stainless steel support screen is Teflon® coated to prevent reactions between the screen and the filter media. Novel O-rings prevent contact between the o-ring and the filter media to create a leak-proof seal.

Designed to Contain 37mm Filter Media

#30 Male Thread at Inlet to Allow Direct Connection to Annular Denuders, Manifolds, Cyclones and Other URG Components

1/4" (5.7 cm) Largest Outer Diameter

URG-2000-22FB:

3 1/2" (8.9 cm) Height (2-Stage)

0.44 lb (0.2 kg)

Stainless Steel Support Screen is Teflon© Coated to Prevent Reactions Between Screen and Filter Media

Design Ensures Sample Integrity and Allows for Easy Transportation to and from Lab

Quick Release Fitting at Outlet for Easy Attachment to Vacuum Pump (URG-2000-22F, shown)

#30 Female Thread at Outlet to Attach URG Components such as PUF Sampler (URG-2000-22FB, shown)

Uses Novel O-Ring Arrangement to Prevent Contact Between O-Ring and Filter Media and Create a Leak-Proof Seal

Available with 1 or 2 Stages