单开口端过滤器外壳

单开口端过滤器外壳

Single open end (SOE) systems have a maximum differential pressure of 60 psi. They are autoclavable at 250°F (121°C) and in-line sterilizable (except where noted) at 261°F (127°C). SOE cartridges have a 222 O-ring configuration to create a tight seal to prevent seepage. Use sump extension adapter kit (sold below) to fit cartridges into housings.This #12 housing fits submicronic cartridges with 222 O-ring sealing caps. The pure PP housing contains no filters, lubricants, or plasticizers. Housing features an O-ring sealed PP drain plug in the sump with a second vent for differential pressure. 
Maximum temperature is 100°F (38°C); maximum pressure is 100 psi. Inlet/outlet ports are 3¼4" NPT(F); length is 143¼8". Includes VITON O-ring. Shpg wt 3 lb (1.4 kg).

单一的开放端部（SOE）系统有一个最大的差压力为60psi。可高温高压灭菌，在250°F（121°C）和在线灭菌的（特别注明除外）在261°F（127°C）。国有企业的墨盒有222 O型圈配置，以创建一个严密的密封，防止渗水。使用油底壳扩展转接器套件（售价低于），以适应为housings.This第12住房222 O型圈密封帽适合亚微米盒的盒。纯PP住房不包含过滤器，润滑剂或增塑剂。房屋设有一个O形圈密封PP第二口的压差在油底壳的放油塞， 
最高温度为100°F（38°C），最大压力为100磅。入口/出口3¼4“NPT（F）;长度为143 = 8”。包括氟橡胶O型圈。SHPG重量3磅（1.4公斤）。