12/pk聚碳酸酯膜过滤器

12/pk聚碳酸酯膜过滤器

   这些可循环利用的容器由洁净、耐高温高压的聚碳酸酯材料构成并带有硅橡胶衬垫或O型圈。钟形基底防止滤液在进入接收器过程中重复污染。最大工作压力为101 psi。Model 29550-44具有可替换鲁尔接头的软管接头，从而它作为一个大面积的注射器过滤器托架。

   Designed for the filtration of aqueous solutions

   These reusable holders are made of clear, autoclavable polycarbonate with silicone gasket or O-rings. The bell-shaped base protects the filtrate from repeated contamination while following in a receiver. Maximum operating pressure is 101 psi.Model 29550-44 has hose nipples which can be replaced by luer connectors to use it as a large-area syringe filter holder.

产品规格

产品类型 聚碳酸酯膜过滤器

连接 阴路厄锁定

材料 聚碳酸酯

过滤面积 0.5平方厘米

过滤器尺寸（mm） 13

Specifications

Product Type Polycarbonate Filter Holders

Connection Female luer lock

Material Polycarbonate

Filtration area 0.5 cm2

Filter size (mm) 13