0.45微米 单开口端的聚丙烯盒

0.45微米 单开口端的聚丙烯盒

单口开端（SOE）系统最大的差压力为60psi。可在250°F（121°C）高温高压灭菌以及在261°F（127°C）内轴灭菌（特别注明除外）。SOE滤芯有222 O型圈配置，从而巩固并防止渗水。使用油底壳扩展适配器套件（另售），使滤芯与外壳适配.串行层magna尼龙滤芯有两个褶尼龙膜顶作为预过滤器。高保留能力和高产量。 

玻璃纤维盒含有硼硅玻璃微纤维交织丙烯酸粘合剂作为保留。使用保护膜过滤系统预过滤器。不在内嵌部分消毒。 

聚丙烯（PP）滤芯中有一个单一的层的过滤介质。化学惰性，高污负荷能力。用预过滤器处理水溶液。疏水; *使用前预湿。不在内嵌部分消毒。 

PTFE膜滤芯具有单层，打褶的PTFE膜层叠的PP的支持。用于气体过滤和通风。具有疏水性和惰性;*过滤水溶液时预湿

有一个单层的PES膜半导体滤芯。每冲洗的18 M？水，以保证滤液的清洁和快速电阻率恢复。扩散率在30psi 12 mL / min。

Single open end (SOE) systems have a maximum differential pressure of 60 psi. They are autoclavable at 250°F (121°C) and in-line sterilizable (except where noted) at 261°F (127°C). SOE cartridges have a 222 O-ring configuration to create a tight seal to prevent seepage. Use sump extension adapter kit (sold below) to fit cartridges into housings.Serial-layer magna nylon cartridges have two pleated nylon membranes—top acts as a prefilter. High retention capacity and high yields. 

Glass fiber cartridges contain interwoven borosilicate glass microfibers held by acrylic binders for exceptional retention. Use as a prefilter to protect membrane filter systems. Not in-line sterilizable. 

Polypropylene (PP) cartridges have a single-layer filter media. Chemically inert with high dirt-loading capacity. Use as a prefilter for aqueous solutions. Hydrophobic; prewet* before use. Not in-line sterilizable. 

PTFE membrane cartridges have a single layer, pleated PTFE membranes laminated to a PP support. Use for gas filtration and venting. Hydrophobic and inert; prewet* when filtering aqueous solutions. 

Semiconductor cartridges have a single-layer PES membrane. Each is flushed with 18 M? water to assure downstream cleanliness and rapid resistivity recovery. Diffusion rate of 12 mL/min at 30 psi.

产品规格

产品类型 滤芯

孔径（μm） 1

材料 聚丙烯

过滤面积 4.0平方英尺

Specifications

Product Type Filter Cartridges

Pore size (µm) 1

Material Polypropylene

Filtration area 4.0 ft2