Filter Cartridges10微米单开口端的聚丙烯盒

10微米单开口端的聚丙烯盒

集合，以适应宽范围的关键应用

    在许多受管制的过程中使用绝对

   会见了广泛的行业和政府标准

   这些国有企业的墨盒有222 O型圈配置，以创建一个密封和防止进水旁路。它们是耐高压加热至250°F

（121℃）和在线灭菌的F至257°F（125°C），最多30分钟周期;耐10小时的累积曝光。过滤器也可以与兼容的

化学药剂进行消毒。所有墨盒适用于180°F（82°C）在10 PSID。使用SOE盒式油底壳转接器套件（另售），以

确保墨盒的墨盒外壳内。符合美国CFR标题21反复接触食品的准则，符合美国药典USP Class VI-121°C塑料指

引，并通过MEM洗脱细胞毒性试验。水提取物中含有小于0.25 EU / mL和通常表现出低含量的非挥发性残留物，

聚丙烯（PP）墨盒热粘合的高纯度的PP纤维。经济污垢承载能力高化学惰性介质。也适用于空气/气体过滤。所

有材料FDAacceptable。预湿的液体过滤前的疏水性（要使用的水溶液中，用甲醇预湿，然后在使用前用水冲洗）。

    A collection to fit a wide range of critical applications

    Absolute-rated for use in many regulated processes

    Meets a wide range of industry and government standards

    These SOE cartridges have a 222 O-ring configuration to create a tight seal and prevent influent bypass. They are autoclavable to 250°F (121°C) and in-line sterilizable to 257°F (125°C) for up to 30-minute cycles; tolerant to an accumulated exposure of 10 hours. The filters may also be sanitized with compatible chemical agents. All cartridges are suitable to 180°F (82°C) at 10 psid. Use a SOE cartridge-sump adapter kit (sold separately) to secure cartridges within housings.

   The cartridges comply with US CFR Title 21 guidelines for repeated food contact, comply with USP Class VI-121°C Plastics guidelines and pass the MEM Elution Cytotoxicity Test. Aqueous extracts contain less than 0.25 EU/mL and typically exhibit low levels of non-volatile residues.
   Polypropylene (PP) Cartridges Thermally bonded high-purity PP fiber. Economical for a chemically inert media with high dirt-loading capacity. Also suitable for air/gas filtration. All materials FDAacceptable. Hydrophobic—prewet before liquid filtration (To use with aqueous solutions, prewet with methanol, then rinse with water before use).