Cole-Parmer® 可编程的10-注射器输液器/提取泵，230 VAC

Cole-Parmer® 可编程的10-注射器输液器/提取泵，230 VAC

需要精度低流量，低压力的应用的理想选择

内置程序，您可以输入最多8个指令，以执行多种功能，你甚至可以重复指令十倍，所有的设置都存储在非易失性存储器中

泵设有一个宽动态范围（100000:1）允许流速从一个缓慢滴入，以源源不断

RS-232接口，让您从个人电脑上使用一些简单的命令伟大的菊花链泵泵操作！

背光字母数字LCD会引导您完成安装和操作程序

程序流速保持，暂停，和方向的改变，每个命令可以被设置为运行长达12小时。你甚至可以编程输液泵/退出序列操作：要么撤退，然后输液或输液其次，通过撤出。选择接受两个10注射器理想的泵送准确的比例泵。

泵还具有两个TTL输入和两路TTL输出。TTL输入，让您使用的过程脚踏开关或定时器控制泵的运转。使用TTL输出为5 V的信号和运行指标。所有型号包括一个6英尺电源线与接地插头（美国标准插头115 VAC型号上，欧洲插头230 VAC型号。包含的内容：一个6英尺电源线与接地插头（美国标准插头115 VAC模型和欧式插头上230 VAC型号）。

Cole-Parmer® programmable ten-syringe infusion/withdrawal pump, 230 VAC

Ideal for low-flow, low-pressure applications where precision is needed

Built-in program lets you enter up to eight commands to perform a variety of functions—you can even repeat commands up to ten times; all settings are stored in nonvolatile memory

Pumps feature a wide dynamic range (100,000:1) allowing for flow rates from a slow trickle to a steady stream

RS-232 interface lets you operate your pump from a personal computer using a few simple commands—great for daisy-chaining pumps!

Backlit alphanumeric LCD steps you through setup and operating procedures

Program flow rate hold, pause, and change of direction; each command can be set to run for up to 12 hours. You can even program infusion/withdrawal pumps to sequence operations: either withdrawal followed by infusion or infusion followed by withdrawal. Choose pumps which accept two up to ten syringes—ideal for pumping exact proportions.
Pumps also feature two TTL inputs and two TTL outputs. The TTL inputs let you use a footswitch or a process timer to control pump operation. Use TTL outputs for 5 V signal and run indicator. All models include a 6-ft cord with grounded plug (U.S. standard plug on 115 VAC models, European plugs on 230 VAC models.

What's Included:
a 6-ft cord with grounded plug (U.S. standard plug on
115 VAC model and European plug on 230 VAC models).