Filter Cartridges单开口端PTFE盒，0.2微米

单开口端PTFE盒，0.2微米

集合，以适应广泛的关键应用

绝对额定用于许多监管过程

满足广泛的行业和政府标准

这些国有企业的墨盒有222 O型环配置来创建一个密封，防止进水绕行。它们是耐高压加热到250°F（121℃）和在线灭菌至257°F（125℃）达30分钟的循环;耐10小时的累积曝光。该过滤器还可以消毒兼容化学剂。所有的墨盒都适合到180°F（82°C），在10 PSID。使用SOE盒油底壳适配器套件（另售）外壳内固定墨盒。

该盒符合美国CFR标题21的重复接触食品的准则，符合美国药典VI-121℃塑料指导方针，并通过MEM洗脱细胞毒性试验。水性提取物含有低于0.25 EU / mL和通常表现出的非挥发性残余物的低水平。

采用热焊代替粘接剂或添加剂百褶聚四氟乙烯滤芯洁净室建造。理想的更积极的液体或空气/气体过滤应用。疏水预湿液过滤之前（为了与水溶液使用，预先润湿用甲醇，然后在使用前用清水冲洗）。

技术指标

产品型号                 滤芯

长度（英寸）             10

孔的尺寸（微米）         0.2

材料                     PTFE

过滤面积                 5.9平方英尺

A collection to fit a wide range of critical applications

Absolute-rated for use in many regulated processes

Meets a wide range of industry and government standards

These SOE cartridges have a 222 O-ring configuration to create a tight seal and prevent influent bypass. They are autoclavable to 250°F (121°C) and in-line sterilizable to 257°F (125°C) for up to 30-minute cycles; tolerant to an accumulated exposure of 10 hours. The filters may also be sanitized with compatible chemical agents. All cartridges are suitable to 180°F (82°C) at 10 psid. Use a SOE cartridge-sump adapter kit (sold separately) to secure cartridges within housings.

The cartridges comply with US CFR Title 21 guidelines for repeated food contact, comply with USP Class VI-121°C Plastics guidelines and pass the MEM Elution Cytotoxicity Test. Aqueous extracts contain less than 0.25 EU/mL and typically exhibit low levels of non-volatile residues.

Pleated PTFE Cartridges Cleanroom-constructed using thermal welding instead of adhesives or additives. Ideal for more aggressive liquid or air/gas filtration applications. Hydrophobic—prewet before liquid filtration (To use with aqueous solutions, prewet with methanol, then rinse with water before use).

Specifications

Product Type     Filter Cartridges

Length (in.)     10

Pore size (µm)     0.2

Material     PTFE

Filtration area     5.9 ft2