Filter Papers55mm的直径，孔径，1.6μ 玻璃纤维过滤器

55mm的直径，孔径，1.6μ 玻璃纤维过滤器

对于分析或重力研究

   硼硅玻璃纤维创建一个生物惰性过滤矩阵，耐化学品和极端pH。过滤器承受高达932°F（500°C）。使用这些

玻璃预过滤器过滤器其他膜的寿命延长。选择过滤器的直径小于您使用的密封膜过滤器固定器直接在膜 

通用模型通过06646-02 -05在空气污染的分析中被广泛使用。型号06646-12至-15厚的过滤器，降低过滤速

度，但较高的承重能力，推荐用于工业废水分析。06646-22至-25低吸收模型应用于工业和废水悬浮物分析， 

使用模型06646-32至-35作为预过滤器，具有很高的纳污能力。这些包装每盒50。型号06646-42至-45颗粒保留

最低和最高流速这些玻璃微纤维过滤器，高效过滤细小沉淀蛋白质。含有粘合剂。

   For analytical or gravimetric studies

   Borosilicate glass fibers create a biologically inert filter matrix that is resistant to both chemicals and pH extremes. Filters withstand up to 932°F (500°C). Use these glass filters as prefilters to extend the life of other membranes. Choose a filter smaller than the diameter of the membrane you are using to seal filter holder directly to the membrane. 
General-purpose models 06646-02 through -05 are widely used in air pollution analysis. Models 06646-12 through -15 are thick filters that have lower filtration speeds, but higher loading capacities; recommended for industrial waste analysis. Low-absorption models 06646-22 through -25 should be used for suspended solids analysis of industrial and waste waters. 
Use models 06646-32 through -35 as prefilters; feature high dirt-holding capacity. These are packaged 50 per box. Models 06646-42 through -45 have the lowest particle retention and the highest flow rate of these glass microfiber filters; highly effective for filtering finely precipitated proteins. Contain binders.