Cole-Parmer VC505-230/50HZZ 230伏交流超声波均质

Cole-Parmer VC505-230/50HZZ 230伏交流超声波均质

处理小批量样品250μL或大如19升/小时，使用可选的连续流动池

独家能量（焦耳）显示器提供最准确的方法，重现结果

开/关独立的脉冲发生器，有助于防止过热

用户界面菜单驱动的提示所有功能，提供了直观的指导

我们的超声波处理器都能够提供500瓦或750瓦的20千赫。建议使用500瓦的型号更小的体积，2英寸或更小的探针。建议使用750瓦的型号体积较大，3/4-探头，连续流动池和杯号角。处理批次样品为250μL小或大如19升/小时，采用连续流动池04710-91（单独订购）。密封器保护单元湿度，灰尘，污垢，和烟雾。单位监控功率（瓦）和能量（焦耳），100％自动调谐功能。脉冲发生器的独立开/关，确保安全的治疗方法对温度敏感的样品，而在高强度的处理和控制开/关循环从1到59秒。基于微处理器的定时器控制流量，1秒至10小时。定时器监视加工的时间和持续时间。

触觉键盘，菜单式显示和简单的功能键相结合，方便用户使用的系统。所有程控参数在屏幕上显示易于阅读，这样你就可以不断监测。调整汽蚀能源强度的可变振幅控制交付给你的样品。功率量被传递到探头被显示两个数字为条形图。屏幕上查看选定的输出电平。

包括：转换器，工具包，脚踏开关连接，13毫米直径（0.5“）探头04710-31带有可更换的笔尖，和一个6英尺长电源线插头。

Process batch samples as small as 250µL or as large as 19 L/hr using optional continuous flow cell

Exclusive energy (joules) monitor provides the most accurate method to reproduce results

On/off independent pulser helps prevent overheating

User-friendly menu-driven prompts provide intuitive guidance through all functions

Our ultrasonic processors are capable of delivering 500 or 750 watts at 20 kHz. The 500-watt models are recommended for smaller volumes, and for probes of 1/2-inch or less. The 750-watt models are recommended for larger volumes, 3/4-inch probes, and the continuous flow cell and cup horn. Process batch samples as small as 250 µL or as large as 19 L/hr using the continuous flow cell 04710-91 (order separately). The sealed converter protects the unit from humidity, dust, dirt, and fumes. Units monitor both power (watts) and energy (joules), and feature 100% automatic tuning. The independent on/off pulser ensures safe treatment of temperature-sensitive samples while processing at high intensity and controls on/off cycles from 1 to 59 seconds. The microprocessor-based timer controls your processes from 1 second up to 10 hours. Timer monitors both the elapsed time and duration of processing.

The tactile keypad, menu-driven display, and simple function keys combine for a user-friendly system. All programmed control parameters are displayed on the easy-to-read screen so you can continuously monitor your process. Adjust cavitation energy intensity delivered to your samples with the variable amplitude control. The amount of power being delivered to the probe is displayed both digitally and as a bar graph. View selected output level on the screen.

What's Included:

converter, tool kit, foot switch connection, 13-mm dia (½") probe 04710-31 with replaceable tip, and a 6-ft cord with plug.