Masterflex 77964-00 I / P ®数字流程泵系统，易装®泵头，115/230 VAC

Masterflex I / P ®数字流程泵系统，易装®泵头，115/230 VAC

316不锈钢外壳和键盘完全密封防止灰尘，水和化学清洁剂

流量范围：0.01〜8 LPM（0.002〜2.1 GPM），包括I/P® 73管。流量取决于驱动器转速和泵管尺寸。

分送：量升（或加仑）复制1免除至999,999份;或SEC时间的，每次分配：1到999,999秒。

六个字符的数字显示4个不同的参数：

流速：0.1至26 LPM分配体积：10毫升至26,520毫升（以1毫升为单位）;复印：1至999,999重复;电机转速：650转1转的分辨率

可逆3/8-hp无刷电机免维护，额定连续工作。可在两个方向清洗

硬盘存储每油管大小的一个校准值，以提高精度。

键盘锁定/解锁功能可以防止意外或篡改。

远程控制功能，通过防水连接器（需要远程电缆附件77300-32，单独出售）速度控制输入：0至20 mA，4至20 mA，0到10 V信号触点闭合：抽方向/启动/停止/素数;

转速计输出：0至20 mA，4至20 mA，0至10 V

驱动器接受三种不同的泵头类型：标准，易装®，和高性能。

I/P® Digital process pump system, Easy-Load® pump head; 115/230 VAC.

316 stainless steel housing and keypad are completely sealed for protection from dust, water, and chemical cleaners

Flow range: 0.01 to 8 LPM (0.002 to 2.1 GPM) with included I/P® 73 tubing. Flow rate depends on drive rpm and tubing size.

Dispense by: volume in liters (or gallons); Copy– 1 to 999,999 dispense copies; or SEC–time of each dispense: 1 to 999,999 seconds.

Six-character digital display of four different parameters:

Flow rate: 0.1 to 26 LPM; Dispense volume: 10 mL to 26,520 mL (in 1 mL increments); Copy: 1 to 999,999 repetitions; Motor rpm: 1 to 650 rpm with 1 rpm resolution

Reversible 3/8-hp brushless motor is maintenance free and rated for continuous duty. Run pump in either direction; purge tubing before or after pumping

Drives store one calibration value per tubing size for improved accuracy.

Keypad lock/unlock feature prevents accidents or tampering.

Remote control capabilities via water-resistant connector (requires remote cable 77300-32, sold separately)—Speed control input: 0 to 20 mA, 4 to 20 mA, or 0 to 10 V signals; Contact closure: pumping direction/start/stop/prime;

Tachometer output: 0 to 20 mA, 4 to 20 mA, or 0 to 10 V

Drive accepts three different pump head types: Standard, Easy-Load®, and High-Performance.