Cole-Parmer 1462700 不锈钢切碎刀片

Cole-Parmer 1462700 不锈钢切碎刀片

内置冷却室防止样品热量积聚

自动关闭防止电机过热和超载

高速刀片在20,000 rpm操作;的研磨3立方英寸体积的样品下降到125微米的颗粒大小，以秒！

电机风扇冷却普及型¼马力，是由研磨室完全密封的，来防尘密封。

自动关机防止过​​热和超载。

磨腔周围的内部热交换器保持准确的温度;通过研磨机后方的两个3/8“OD喷嘴连接室到循环浴缸或非蒸馏水。

重型铸铝漆包线光洁度;切割刀片是不锈钢

注：在室内使用液体可能会损坏电机。单位是间歇使用。

包含：

包括：一个6英尺的三芯线，115 VAC模型有一个插件。

Built-in cooling chamber prevents heat build-up on sample

Auotmatic shutoff protects against motor overheating and overloading

High-speed blade operates at 20,000 rpm; grind up to a 3-cu in. volume sample down to 125-µm particle size in seconds!

Fan-cooled, universal-type ¼-hp motor is completely sealed from the grinding chamber by a dust-tight seal.

Automatic shutoff protects against overheating and overloading.

Internal heat exchanger surrounds grinding chamber to maintain a precise temperature; connect chamber to recirculating bath or tap water via two 3/8" OD nozzles at rear of mill.

Heavy-duty cast aluminum construction with enameled finish; cutting blade is stainless steel

Note: Using liquids in the chamber may damage motor. Unit is for intermittent use only.

What's Included:

What''s included: a 6-ft three-wire cord, 115 VAC model has a plug.