Cole-Parmer 5058CP 计数控制器

Cole-Parmer 5058CP 计数控制器

自动操作，让您远离设备。

程序设置不到5秒

符合NIST溯源标准 - 定时精度为0.01％

控制器执行再现的搅拌，加热或抽时间。用于定时关机或反复开/关定时在试验过程。手动暂停开关将覆盖程序不打扰它，并可立即关掉设备。内置镍镉电池在停电的情况下位置程序。三相接地插座继电器装置，120伏，115安培，1800瓦特，和1/3马力。

型号94400-62 WalkAway 关断控制器计数，将任何一件装备在设定的时间结束。可编程在三个区间设置：99.99秒，0.01秒1分钟到9999分钟，1小时至9999小时。

型号94400-64 WalkAway重复导通和截止控制器计数，将任何设备上的一个编程时间和关闭不同的编程时间。重复的功能会自动开启和关闭程序的时间NTIL手动停止继续骑自行车。可编程自动开关闭时间期间在三个间隔设

置：1秒至99秒，1分钟，99分钟，1小时至99小时。

两款型号包括由制造商提供NIST可溯源校准报告。

Automatic operation allows you to walk away from the equipment.

Program setting in less than 5 seconds

Meets NIST traceability standards - timing accuracy is 0.01%

Controllers perform reproducible stirring, heating, or pumping times. Used for timed shutdown or repeated on/off timing during any test. A manual pause switch overrides the program without disturbing it, and permits equipment to be switched off instantly. Supplied internal nicad battery maintains programs in the event of a power outage. Three-pronged grounded receptacle relay for apparatus to 120 VAC, 115 amps, 1800 watts, and 1/3 horsepower.

Model 94400-62 Walkaway turn-off controller counts up and turns any piece of equipment off at the end of a set time period. Programmable in three interval settings: .01 second to 99.99 seconds, 1 minute to 9999 minutes, and 1 hour to 9999 hours.

Model 94400-64 Walkaway repeat turn-on/turn-off controller counts up and turns any piece of equipment on for a programmed time and off for a different programmed time. Repeat features automatically continues cycling on and off programmed times ntil manually stopped. Programmable for separate on and off timng periods in three interval setting: 1 second to 99 seconds; 1 minute to 99 minutes, and 1 hour to 99 hours.

Both models include an NIST-traceable calibration report supplied by the manufacturer.