Thermo Scientific 2054Q 多勃洛克模拟干缸体加热器

Thermo Scientific 2054Q 多勃洛克模拟干缸体加热器

温度均匀±0.5degC（±0.9degF）

三工位开关，高，低，或关闭

低范围环境和60℃之间（140degF）

高范围内130degC（266degF）

这些多功能加热系统广泛的试管同时均匀加热。系统提供了不同的组合，为您的特定需求块。一个完整的加热器系统由一个标准的加热器底座和加热块（另售）。每块加热器底座设有无极调温旋钮标从0到10的重复设置。有独立的电源开关，电源灯工作独立调温转盘。

金属护套的安全加热器确保温度均匀性和快速加热。加热器基地有不锈钢外壳烤漆表面，包括6英尺，三芯电源线，115伏交流机型包括插件。

Temperature uniformity within ±0.5degC (±0.9degF)

Three-position switch—high, low, or off

Low-range between ambient and 60degC (140degF) and

high-range to 130degC (266degF)

These versatile heating systems uniformly heat a wide range of test tubes simultaneously. Systems offer different combination of blocks for your specific needs. A complete heater system consists of a standard heater base and heating blocks (sold separately). Each block heater base features a stepless thermostat dial marked from 0 to 10 for repeatable settings. A separate power switch with power-on light operates independently of the thermostat dial.

Metal-sheathed safety heaters ensure temperature uniformity and rapid heating. Heater bases have steel housing with baked enamel finish, and include 6-ft, three-wire power cord; 115 VAC models include a plug.