Spirax Sarco TD52 3/4" 54531C 蒸汽处理配件

紧密关闭防止浪费宝贵的蒸汽

性价比高，小型设计使得它们需要大小，高效运作的排水蒸汽管道，蒸汽伴热管线，小型工艺设备的理想选择。

从热力学（TD）U形弯管排放接近蒸汽温度，保持蒸汽空间无冷凝。

不锈钢构造，TDU形弯管承受过热，冷冻，腐蚀性的冷凝水锤和振动。

注：最小压力令人满意的运作是3.5 PSIG。在任何条件下操作最大背压不超过80％的进气压力，否则防气阀可能不会关闭。典型应用：

蒸汽排水干管和管线

工艺设备

洗衣及厨房设备

过热蒸汽应用

室外安装受冷度影响

The tight shut-off prevents valuable steam from being wasted

Cost effective, compact design makes them ideal for drainage of steam mains, steam tracing lines, and small process equipment where size and efficient operation are important.

Discharge from Thermo-Dynamic (TD) traps is close to steam temperature—steam space is kept free from condensate.

Constructed of stainless steel, TD traps withstand superheat, waterhammer, freezing, corrosive condensate, and vibration.

Note: Minimum pressure for satisfactory operation is 3.5 psig. Maximum back pressure should not exceed 80% of the inlet pressure under any conditions of operation, otherwise the trap may not shut.

Typical applications:

Steam main drain and tracer lines

Process equipment

Laundry and kitchen equipment

Superheated steam applications

Outdoor installations subject to freezing