TQC PA-2055 11齿2mm特粗刀片

PAT的油漆通过Gardco产生附着力测试套件包含所有需要的工具和材料，除了多齿刀具刀片，用于根据ASTM测试进行粘附性试验在施加到一个平坦，均匀的表面涂料方法D 3359，方法B和DIN标准号53151的多齿刀片分开布置，以允许在各种可用的设计选择。

全新的人体工程学手柄设计给人舒适和精确的控制。 它有助于保持你的手在自然的位置，避免紧张和疲劳。 对于无论是左手或右手的人都适用手柄。 由于该间距的准确性和与该测试可以进行的速度，所述多个齿铣刀是用于优选的工具在本试验中，除了当评估必须施加到表面上，它们既不是平坦的或相对平滑的涂层制成。 在这些不利条件下单刀片式铣刀，通常需要根据ASTM的方法的。 一个多齿刀具附着力管道也可用。

多种尖端切割机可与引导牙齿和六齿间距在1.0毫米至2.0毫米。 该1.0毫米间距也可与11齿，引导牙齿。 可用无导向齿铣刀11齿间距1.5毫米。 

该套件包括新的刀片架/测试仪的手柄，内六角扳手用于更换刀片，剥落刷，10倍的LED手持放大镜 电池/瓦特（放大镜有2个LED灯和1.5“玻璃镜片），磁带- PA-280630 *，副本的ASTM测试方法D-3359用作教学指导，以及一个坚固的塑料手提箱带手柄，所有的组件都嵌套在层压模切泡沫的情况之内。

The P-A-T Paint Adhesion Test Kit produced by Gardco contains all of the tools and materials needed, except for the multi-tooth cutter blade, for conducting adhesion tests on paints applied to a flat, uniform surface in accordance with ASTM Test Method D 3359, method B and DIN Standard No. 53151. The multi-tooth cutter blade is furnished separately to permit choice among the various available designs.

The new ergonomic handle design gives comfortable and precision control. It helps keep your hand in a natural position, preventing strain and fatigue. One handle for both the right or left handed person. Due to the accuracy of the spacings and the speed with which the test can be conducted, the multiple tooth cutter is the preferred tool for use in this test except when evaluations must be made on coatings applied to surfaces which are neither flat or relatively smooth. Under these adverse conditions a single razor blade type cutter is often desirable under method A of ASTM. A Multi-Tooth Adhesion Cutter for pipe is also available.

Multiple tip cutters are available with guide teeth and six spaced teeth at 1.0 and 2.0mm. The 1.0mm spacing is also available with eleven teeth and guide teeth. Available without guide teeth are cutters with eleven spaced teeth at 1.5mm. Also note other cutter blades illustrated in the dimensional drawings. (Ask for information on special variable spaced cutters and cutters for curved surfaces.)

The kit includes the new blade holder / handle with guide, hex wrench for changing blades, flaking brush, 10x LED hand held magnifier w/batteries (magnifier has 2 LED lights and 1.5" glass lens), tape - PA-280630*, copy of ASTM Test Method D-3359 for use as as instruction guide, and a sturdy plastic carrying case with handle. All of the components are nested in laminated diecut foam within the case.