Masterflex® 07575-10 L / S数字处理驱动器与不锈钢外壳，0.1至600 RPM，115/230 VAC

Masterflex® L / S数字处理驱动器与不锈钢外壳，0.1至600 RPM，115/230 VAC

Masterflex® L/S Digital Process Drive with Stainless Steel Housing, 0.1 to 600 RPM, 115/230 VAC

流体输送，分配，在实验室和计量应用，流程和冲洗环境的理想选择

316不锈钢外壳是完全密封的IP66和NEMA 4X额定

直冲式驱动器是易清洁，耐常用的清洗和消毒的解决方案只是软管清洁

无刷免维护电机提供±0.1％的速度控制精度1量程比6000

全遥控功能允许方便地集成到自动化流程

流速：0.006至3400毫升/分钟（至54 GPH）与L/S油管。流量取决于驱动器转速和泵管尺寸。

图形液晶显示四种工作模式，连续运行，定时分配，复制分配量分配。泵的性能不断

菜单驱动的界面，可以选择七种语言，编程及操作

免除：体积毫升（0.001〜99999毫升），升和加仑;复制1到9,999分配周期;或SEC时间的时间间隔，每次分配周期（1秒到99小时59分59秒）

通过密封圆形连接器驱动器上的远程控制：

-速度控制输入0至20 mA，4至20 mA或0〜10 V; 

-抽水方向需要集电极开路或触点闭合

--开始/停止/清洗需要开放收藏家或触点闭合; 

-转速计输出0至20毫安，4至20 mA，0〜10 V，集电极开路

这些精密驱动器提供模拟远程控制选项和简单的编程自动化过程应用的理想选择。驱动器具有可编程分配间隔，可以让你设置方便，自动配药分配循环之间的延迟。程序校准，确保分配和显示精度驱动器存储校准值每油管尺寸

驱动程序通过简单的键盘膜，键盘锁定/解锁功能保护设置。汽车是可逆的，所以您可以清除之前或之后，在任一方向的泵和泵液管包含的内容： 6英尺（1.8米）的线与IEC 22 320/CEE的连接器耦合器;水密线连接。在订货时指定目的地国家特定国家的插头/电源线驱动器随附。

Ideal for fluid transfer, dispensing, and metering applications in laboratory, process and wash-down environments

316 stainless steel housing is completely sealed—IP66 and NEMA 4X rated

Washdown drive is easy-to-clean and resistant to commonly used cleaning and sanitizing solutions—simply hose down to clean

Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio

Full remote control capabilities allow easy integration into automated processes

Flow rate: 0.006 to 3400 mL/min (up to 54 GPH) with L/S tubing. Flow rate depends on drive rpm and tubing size.

Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually

Menu-driven interface lets you select one of seven languages for programming and operation

Dispense by: Volume—in milliliters (0.001 to 99999 mL), liters, and gallons; Copy—1 to 9,999 dispense cycles; or SEC—time interval between each dispense cycle (1 sec to 99 hr, 59 min, 59 sec)

Remote control via sealed circular connector on drive: 

--Speed control input 0 to 20 mA, 4 to 20 mA, or 0 to 10 V; 

--Pumping direction requires open collector or contact closure; 

--Start/stop/purge requires open collector or contact closure; 

--Tachometer output 0 to 20 mA, 4 to 20 mA, or 0 to 10 V, open collector

These precision drives offer analog remote control options and simple programming—ideal for automated process applications. Drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size.

Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings. Motor is reversible so you can purge tubing before or after pumping and pump fluid in either direction.

What's Included:

Six-foot (1.8-meter) line cord with IEC 320/CEE 22 connector coupler; watertight cord connection. Specify destination country when ordering; drive is shipped with country-specific plug/cord set.

产品规格
产品类型	泵驱动器
最大流量（毫升/分钟）	3400
最小流量（毫升/分钟）	0.006
控制类型	数字变频调速
功率（安培）	230 VAC，1.1， 115 VAC， 2.2
马力（HP）	1/10
电机功率（瓦）	75
电机的正反转	是
转	0.1至600
IP防护等级（驱动器）	IP66（NEMA 4X）
数字分配	是
尺寸（驱动器）	12“长 x 9英寸宽x 9.25”高 （30.5×22.9×23.5厘米）
速度控制	±0.1％  （分辨率：0.1转速在600转）
接受泵头号	2
接受泵头类型	标准，易装®，易装易装3，II，墨盒，高性能，多通道，PTFE管，PTFE隔膜
品牌	Masterflex
型号	07575-10
生产编号	07575-10

Specifications
Product Type	Pump Drive
Max flow rate (mL/min)	3400
Min flow rate (mL/min)	0.006
Control type	Digital Variable Speed
Power (Amps)	2.2 at 115 VAC 1.1 at 230 VAC
Motor (hp)	1/10
Motor (watts)	75
Reversible motor	Yes
rpm	0.1 to 600
IP rating (Drive)	IP66 (NEMA 4X)
Digital dispensing	Yes
Dimensions (Drive)	12"L x 9"W x 9.25"H (30.5 x 22.9 x 23.5 cm)
Speed control	±0.1% (Resolution: 0.1 rpm at 600 rpm)
No. of Pump heads accepted	2
Type of Pump heads accepted	Standard, Easy-Load®, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Brand	Masterflex
Model	07575-10
Manufacturer number	07575-10