Masterflex® 77965-00 I / P精密无刷水泵模拟远程易装泵头，115/230 VAC

Masterflex® I / P精密无刷水泵模拟远程易装泵头，115/230 VAC

Masterflex I/P precision brushless pump with analog remote and Easy-Load pump head, 115/230 VAC

流量：0.4-8.0 LPM（0.11至2.1 GPM），包括I/P73管，流速取决于电机转速和泵管尺寸。

三转弯的速度控制提供精确度和可重复性的LED显示屏显示分辨率1％％的速度

1/3-hp无刷电机以最少的维护处理具有挑战性的应用

非芯片的环氧树脂涂层，IP55防护等级的钢和铝外壳保护防潮，抗化学品，灰尘

紧凑型驱动器是重量轻，携带用一只手，但强大到足以驱动两个泵头 

I/P ®无刷工艺驱动器提供重型性能要求苛刻的过程应用。1/3-hp无刷电机驱动两个泵头任何油管制定，同时消除了碳刷更换的成本和不便。

远程输入：4至20 mA，0〜10 V，启动/停止和扭转（需要附件77300-32远程电缆套件，单独出售）

远程输出：“泵准备就绪”的信号和4至20 mA输出（需要附件77300-32远程电缆套件，单独出售）

启动/停止，改变泵的方向，或交换机之间的本地和远程控制使用密封的键盘有独立的开/关开关和三转的速度控制电位器。包括哪些内容： 6英尺（1.8米）与IEC320/CEE 22连接器耦合线15针圆形水

Flow: 0.4 to 8.0 LPM (0.11 to 2.1 GPM) with included I/P 73 tubing; flow rate depends on motor rpm and tubing size.

Three-turn speed control offers precision and repeatability—LED display shows percent speed with 1% resolution

1/3-hp brushless motor handles challenging applications with minimal maintenance

Non-chip epoxy-coated, IP55-rated steel and aluminum enclosure protects against moisture, chemicals, and dust

Compact drives are light enough to carry with one hand, but powerful enough to drive two pump heads

I/P® brushless process drives offer heavy-duty performance for demanding process applications. Robust, 1/3-hp brushless motor drives up to two pump heads with any tubing formulation, while eliminating the cost and inconvenience of brush replacement.

Remote inputs: 4 to 20 mA, 0 to 10 V, start/stop, and reverse (requires 77300-32 remote cable kit, sold separately)

Remote outputs: “pump ready” signal and 4 to 20 mA outputs (requires 77300-32 remote cable kit, sold separately)

Stop/start, change pump direction, or switch between local and remote control using the sealed keypad with separate on/off switch and three-turn speed control potentiometer.

What’s included: 6-ft (1.8-m) line cord with IEC320/CEE 22 connector coupler; 15-pin circular water