Masterflex® 07591-20 I / P精密模块化驱动器与台式控制器和远程I / O; 6至650 rpm，90到260 VAC

Masterflex® I / P精密模块化驱动器与台式控制器和远程I / O; 6至650 rpm，90到260 VAC

模块化驱动器，可将电机和控制器，放置于方便的，空间有限的场所

最小流量为0.04 LPM（0.01加仑）;高性能I / P泵头或26 LPM（6.9 GPM）有两个叠放I / P易装或标准泵，最大流量19 LPM（5.0 GPM）头

三位数的LED显示屏显示电机转速确认速度设定一目了然

薄膜键盘，易涨前控制速度，方向，开始/停止

在任一方向可逆电机吹扫之前或之后抽泵液管

LED指示灯确认电机方向

强大的马达让你叠两个泵头流速增加，多通道应用

独立的速度和功率控制（开/关）的同时打开泵的开/关保持速度设定

精度和可重复性±0.25％的速度控制仪表和传输流体

远程控制功能，通过一个DB9母连接器，控制器背面

- 速度控制输入

- 泵方向（CW / CCW）通过集电极开路或触点闭合

- 启动/停止通过集电极开路或触点闭合

I / P模块化驱动器具有可逆的抽水，并允许您灵活地分隔电机控制器。这些准确的模块化驱动器具有强大的马达，速度显示，±0.25％的速度控制精确的流量调节计量和关键传输应用的理想选择。

防水溅ABS塑料控制器外壳IP33额定驱动外壳环氧树脂成品钢材，IP33额定

6英尺（1.8米）电缆连接驱动器和控制器，可选的延长电缆07557-51可

以延长至15英尺（4.5米）的内容包括： 6英尺（1.8米）的线IEC 320/CEE22的距离插座中。这些模型是特定国家的插头/电源线出货，订货时请注明最终目的地。

Masterflex I/P Precision Modular Drive with Benchtop Controller and Remote I/O; 6 to 650 rpm, 90 to 260 VAC

Modular drives let you place motor and controller where convenient—ideal for limited or awkward spaces

Minimum flow rate is 0.04 LPM (0.01 GPM); maximum flow rate is 19 LPM (5.0 GPM) with the I/P High-Performance pump head or 26 LPM (6.9 GPM) with two stacked I/P Easy-Load or Standard pump heads

Three-digit LED display shows motor rpm—confirm speed setting at a glance

Membrane keypad for easy up-front control of speed, direction, and start/stop

Reversible motor—purge tubing before or after pumping; pump fluid in either direction

LED indicators confirm motor direction

Powerful motors let you stack two pump heads for increased flow rates and for multichannel applications

Separate speed and power (on/off) control—maintain speed setting while turning pump on/off

±0.25% speed control; meter and transfer fluids with accuracy and repeatability

Remote control capabilities via a DB9 female connector on back of controller

– Speed control input

– Pump direction (CW/CCW) via open collector or contact closure

– Start/stop via open collector or contact closure

I/P modular drives feature reversible pumping and allow you the flexibility to separate the motor from the controller. These accurate modular drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering and critical transfer applications.

Splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated

6-ft (1.8-m) cable connects drive and controller; optional extension cable 07557-51 is available to extend distance to 15 ft (4.5 m)

What's Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

产品规格
产品类型	泵驱动器
最大流量（毫升/分钟）	19000
最小流量（毫升/分钟）	36
控制类型	变速
功率（安培）	230 VAC 2.2 ，115 VAC时4.4
马力（HP）	1/5
电机功率（瓦）	149
电机的正反转	是
转	6至650
IP防护等级（控制器）	33
IP防护等级（驱动器）	33
尺寸（控制器）	10.5“长x 8.25”宽x 5英寸高 （26.7×21×12.7厘米）
尺寸（驱动器）	14.13英寸长 x 5.56英寸宽x 6英寸高 （35.9 X 14.1 X15.2厘米）
速度控制	0.25％
接受泵头号	2
接受泵头类型	I / P标准，I / P易装，I / P高效
品牌	Masterflex
型号	07591-20
生产编号	07591-20

Specifications
Product Type	Pump Drive
Max flow rate (mL/min)	19000
Min flow rate (mL/min)	36
Control type	Variable speed
Power (Amps)	4.4 at 115 VAC 2.2 at 230 VAC
Motor (hp)	1/5
Motor (watts)	149
Reversible motor	Yes
rpm	6 to 650
IP rating (Controller)	33
IP rating (Drive)	33
Dimensions (Controller)	10.5"L x 8.25"W x 5"H (26.7 x 21 x 12.7 cm)
Dimensions (Drive)	14.13"L x 5.56"W x 6"H (35.9 x 14.1 x 15.2 cm)
Speed control	0.25%
No. of Pump heads accepted	2
Type of Pump heads accepted	I/P Standard, I/P Easy-Load, I/P High-Performance
Brand	Masterflex
Model	07591-20
Manufacturer number	07591-20