Masterflex® 07557-00 L / S精密模块化驱动器与台式控制器和远程I / O，6至600 rpm，90到260 VAC

Masterflex® L / S精密模块化驱动器与台式控制器和远程I / O，6至600 rpm，90到260 VAC

Masterflex L/S Precision Modular Drive with Bench Top Controller and Remote I/O; 6 to 600 rpm, 90 to 260 VAC

模块化驱动器，可将电机和控制器，放置于方便的，空间有限的场所，油烟机，或隔离室

流量0.06至3400毫升/分钟（取决于驱动器转速和泵管尺寸）

三位数的LED显示屏显示电机转速确认速度设定一目了然

薄膜键盘，溢涨前控制速度，方向，开始/停止

可逆电机;前或后抽泵液清洗油管在任一方向

LED指示灯确认电机方向

强大的马达让你叠2个或4个泵头流速增加，多通道应用

独立的速度和功率控制（开/关）;保持速度设定，而转向泵开/关

精度和可重复性±0.25％的速度控制仪表和传输流体

远程控制功能，通过驱动器背部的一个DB9母接头：速度控制输入4至20 mA或0〜10 V;泵方向（CW / CCW）通过集电极开路或接点闭合启动/停止通过集电极开路或触点闭合

防水溅ABS塑料控制器外壳IP33额定驱动外壳环氧树脂成品钢材，IP33额定

6英尺（1.8米）电缆驱动器和控制器连接，使用可选的延长电缆07557-51延伸至15英尺（4.6米）

L/S®模块化驱动器采用可逆的抽水，并允许您灵活地分隔电机控制器。这些准确的模块化驱动器具有强大的马达，速度显示，±0.25％的速度控制精确的流量调节计量应用的理想选择。内容包括： 6英尺（1.8米）与IEC 320/CEE22插座的电源线。这些模型是特定国家的插头/电源线出货，订货时请注明最终目的地。

Modular drives let you place motor and controller where convenient—ideal for limited spaces, hoods, or isolation chambers

Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)

Three-digit LED display shows motor rpm—confirm speed setting at a glance

Membrane keypad for easy up-front control of speed, direction, and start/stop

Reversible motor; purge tubing before or after pumping; pump fluid in either direction

LED indicators confirm motor direction

Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications

Separate speed and power (on/off) control; maintain speed setting while turning pump on/off

±0.25% speed control; meter and transfer fluids with accuracy and repeatability

Remote control capabilities via a DB9 female connector on back of drive: Speed control input 4 to 20 mA or 0 to 10 V; Pump direction (CW/CCW) via open collector or contact closure; Start/stop via open collector or contact closure

Splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated

6-ft (1.8-m) cable connects drive and controller; use optional extension cable 07557-51 to extend to 15 ft (4.6 m)

L/S® modular drives feature reversible pumping and allow you the flexibility to separate the motor from the controller. These accurate modular drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications.

What's Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.