Masterflex® 77240-10 L / S ®紧凑，变速泵。双通道，115/230 VAC

Masterflex® L / S ®紧凑，变速泵。双通道，115/230 VAC

Masterflex® L/S® compact, variable-speed pump. Dual-channel, 115/230 VAC

整体头端提供了可重复的快速设置重复的低流速

流速为0.8〜105毫升/分钟，这取决于驱动器转速和泵管尺寸。

两站式管套是很容易安装，没有闭塞或张力调整

独立的单圈速度控制和转向泵/关/反向开关保持速度设定时开/关

通过触点闭合回泵远程启动/停止

双通道模式提供了两个独立的通道流通同步

双通道模式接受L/S® 13和L/S 14两管套

这种紧凑型，可堆叠的泵有一个耐用的不锈钢外壳以及芯片，耐环氧基涂料。铝阳极氧化膜阻塞床波动快速装载两站管套。宽闭塞角度防止流体倒流的油管的额定压力。

MAX按钮运行电机在整个转速迅速素或冲洗管。自润滑热塑性聚酯（Ertalyte ® TX）滚筒低摩擦，长耐磨损，运行平稳，寿命长。

包括：双电压（115/230VAC）台式电源与IEC320/CEE22插座。泵在运输线/插头装配到指定目的地国家。

Pump with integral head delivers repeatable low flow rates with quick set up

Flow rate of 0.8 to 105 mL/min—depending on drive rpm and tubing size.

Two-stop tube sets are easy to load with no occlusion or tension adjustment

Separate single-turn speed control and forward/off/reverse switch—maintain speed setting when turning pump on/off

Remote start/stop via contact closure on back of pump

Dual-channel model delivers synchronous flow from two separate channels

Dual-channel model accepts L/S® 13 and L/S 14 two-stop tubing sets

This compact, stackable pump features a durable steel housing with chip resistant epoxy-based paint. The anodized aluminum occlusion bed swings open for quick loading of the two-stop tube sets. Wide occlusion angle prevents fluid backflow up to the rated pressure of the tubing. MAX button runs motor at full rpm to rapidly prime or flush tubing. Self-lubricating thermoplastic polyester (Ertalyte®TX) rollers are low-friction and long wearing for smooth operation and long life.

What's included: dual-voltage (115/230 VAC) benchtop power supply with IEC320/CEE22 socket. Pump is shipped with cord/plug assembly specific to country of destination.