 |
Masterflex I / P数字处理驱动器与不锈钢外壳，0.1至650转，90到260 VAC
Masterflex I/P Digital Process Drive with Stainless Steel Housing; 0.1 to 650 rpm, 90 to 260 VAC
Precision digital drives offer three dispensing modes and precision low-maintenance motors
Minimum flow rate is 0.0006 LPM (0.0001 GPM); maximum flow rate is 19 LPM (5.0 GPM) with the I/P High-Performance pump head or 26 LPM (6.9 GPM) with two stacked I/P Easy-Load or Standard pump heads
Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
Menu-driven interface lets you select one of seven languages for programming and operation
Dispense by mL—volume in mL of each dispense, 0.001 to 9999 mL; Copy—1 to 9,999 dispense cycles; or SEC—time interval between each dispense cycle (1 to 9,999 secs)
Anti-drip function ensures dispense accuracy
Reversible motor—purge tubing before or after pumping; pump fluid in either direction
Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
Powerful motors let you stack 2 pump heads with any tubing formulation for increased flow rates and for multichannel applications
Remote control capabilities via watertight connection
– Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V
– Pumping direction requires open collector or contact closure
– Start/stop/purge requires open collector or contact closure
– Tachometer output scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, open collector
Model 77420-10 features a 316 stainless steel housing with an anodized aluminum base. Ideal for pharmaceutical, dairy, biotech, and food and beverage applications.
These full-featured drives give you rugged performance and precise digital control. Ideal for fluid transfer, dispensing, and metering applications in laboratory, process, and industrial environments including pharmaceutical, food & beverage, dairy, chemical, manufacturing, and water treatment.
Precision drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing by time or by volume. To increase dispense accuracy and prevent dripping, programmable anti-drip function briefly reverses motor at end of dispense cycle. Precise PWM speed control (±0.1%) maximizes accuracy and efficiency while the brushless motor gives you quiet, maintenance-free reliability. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings.
The IP66, NEMA 4X rated housings are completely sealed, easy-to-clean, and resistant to commonly used cleaning and sanitizing solutions. The reversible, maintenance-free brushless motor offers a full complement of remote control capabilities allowing easy integration into your automated processes. Drives feature a membrane keypad for easy programming. Select tubing size and enter desired flow rate—drive locks in required rpm.
What's Included:
6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering
| Specifications | ||
| Max flow rate (mL/min) | 26000 | |
| Min flow rate (mL/min) | 0.6 | |
| Control type | Digital Variable Speed | |
| Flow rate with I/P 26 tubing (LPM) | 0.01 to 4.0 | |
| Flow rate with I/P 26 tubing (GPM) | 0.002 to 1.1 | |
| Flow rate with I/P 70 tubing (GPM) | 0.002 to 2.1 | |
| Flow rate with I/P 88 tubing (LPM) | 0.02 to 17.0 | |
| Flow rate with I/P 82 tubing (LPM) | 0.02 to 13.0 | |
| Flow rate with I/P 70 tubing (LPM) | 0.01 to 8.0 | |
| Flow rate with I/P 88 tubing (GPM) | 0.005 to 4.5 | |
| Product Type | Masterflex I/P Drive | |
| Flow rate with I/P 82 tubing (GPM) | 0.005 to 3.5 | |
| Flow rate with I/P 89 tubing (LPM) | 0.03 to 19.0 | |
| Flow rate with I/P 73 tubing (LPM) | 0.01 to 8.0 | |
| Flow rate with I/P 73 tubing (GPM) | 0.002 to 2.1 | |
| Flow rate with I/P 89 tubing (GPM) | 0.007 to 5.0 | |
| Power (Amps) | 4.5 A at 115 VAC; 2.5 A at 230 VAC | |
| Motor (hp) | 3/8 | |
| Motor (watts) | 280 | |
| Reversible motor | Yes | |
| rpm | 0.1 to 650 | |
| Digital dispensing | Yes | |
| Dimensions (Drive) | 16.7" x 11.1" x 12.9" (42.4 x 28.2 x 32.8 cm) | |
| Speed control | ±0.1% | |
| No. of Pump heads accepted | 2 | |
| Type of Pump heads accepted | I/P Standard, I/P Easy-Load, I/P High-Performance | |
| Brand | Masterflex | |
| Model | 77420-10 | |
| Manufacturer number | 77420-10 | |
精密数字驱动器提供三种分配模式和精度低维护电机
最小流量为0.0006 LPM（0.0001 GPM），高性能I / P泵头或26 LPM（6.9 GPM）有两个叠放I / P易装或标准泵，最大流量19 LPM（5.0 GPM）头
图形液晶显示四种工作模式，连续运行，定时分配，复制分配量分配。泵的性能不断。
菜单驱动的界面，可以选择七种语言，编程及操作
免除毫升每毫升容积分配，0.001〜9999毫升;复制1至9,999点胶周期;或SEC时间每次分配周期之间的时间间隔（1到9,999秒）
防滴漏功能，确保免除准确性
在任一方向可逆电机吹扫之前或之后抽泵液管
无刷免维护电机提供±0.1％的速度控制精度1量程比6000
强大的马达让你叠2泵头任何油管制定的流速增加，多通道应用
远程控制功能，通过水密连接
- 可扩展速度控制输入0至20 mA，4至20 mA，0〜10 V
- 抽水方向需要集电极开路或触点闭合
- 启动/停止/清除需要集电极开路或触点闭合
- 可扩展的转速计输出0至20 mA，4至20 mA，0〜10 V，集电极开路
型号77420-10 316不锈钢外壳，阳极氧化铝基地。制药，乳品，生物技术，食品和饮料应用的理想选择。
这些全功能的驱动器给你坚固的性能和精确的数字控制。流体输送，分配，在实验室和计量应用过程中，包括制药，食品饮料，乳品，化工，制造，水处理和工业环境的理想选择。精密驱动器具有可编程分配间隔，可以让你设置之间的延迟免除方便，自动点胶周期按时间或按体积。为了提高分配的准确性和防止滴水，可编程防滴漏功能简要电机反转点胶周期结束。精确的PWM速度控制（±0.1％）的精度和效率最大化，而 无刷电机，为您提供安静，免维护可靠性。程序校准，确保分配和显示精度驱动器存储校准值每管大小。计划器通过简单的键盘膜，键盘锁定/解锁功能保护设置，NEMA 4X，IP66额定外壳是完全密封，易清洁，耐常用的清洗和消毒液。可逆的，免维护的无刷电机提供了完整的远程控制功能，方便地集成到自动化流程。驱动器配有键盘膜，易于编程。选择管的大小，然后输入所需的流量驱动器锁在所需的转速。包括： 6英尺（1.8米）线与IEC 320/CEE22插座。这些模型是特定国家的插头/电源线出货，订货时请注明最终目的地
| 产品规格 | ||
| 最大流量（毫升/分钟） | 26000 | |
| 最小流量（毫升/分钟） | 0.6 | |
| 控制类型 | 数字变频调速 | |
| 流量与I / P 26管（LPM） | 0.01〜4.0 | |
| 流量与I / P 26管（GPM） | 0.002至1.1 | |
| 流量与I / P 70管（GPM） | 0.002至2.1 | |
| 流量与I / P 88管（LPM） | 0.02至17.0 | |
| 流量与I / P 82管（LPM） | 0.02〜13.0 | |
| 流量与I / P 70管（LPM） | 0.01至8.0 | |
| 流量与I / P 88管（GPM） | 0.005至4.5 | |
| 产品类型 | 的Masterflex I / P驱动器 | |
| 流量与I / P 82管（GPM） | 0.005至3.5 | |
| 流量与I / P 89管（LPM） | 0.03至19.0 | |
| 流量与I / P 73管（LPM） | 0.01至8.0 | |
| 流量与I / P 73管（GPM） | 0.002至2.1 | |
| 流量与I / P 89管（GPM） | 0.007至5.0 | |
| 功率（安培） | 在115 VAC 4.5 2.5在230 VAC | |
| 马力（HP） | 3/8 | |
| 电机功率（瓦） | 280 | |
| 电机的正反转 | 是 | |
| 转 | 0.1至650 | |
| 数字分配 | 是 | |
| 尺寸（驱动器） | 16.7“×11.1”×12.9“ （42.4所述28.2所述32.8厘米） | |
| 速度控制 | ±0.1％ | |
| 接受泵头号 | 2 | |
| 接受泵头类型 | I / P标准，I / P易装，I / P高效 | |
| 牌 | 的Masterflex | |
| 模型 | 77420-10 | |
| 制造商数量 | 77420-10 | |
| 
| 
| |||||||||||||||||||
购买咨询
（已有0条咨询）商品评论
（已有0条评论）购买流程
1.购买产品：点击“立即购买”→填写产品数量、联系方式并提交→会员顾问订单处理→合同签订。
2.咨询产品：请联系会员顾问或致电会员客服电话。
3.如果您还不是我们的会员，请先注册。
4.最小起订数量：1 ，进口产品货期，请跟产品担当联系！
品牌担当：
投诉电话：17717909117
联系方式: 电话：021-52069907 分机 或拨0转总机,传真：010-52060857
维修流程
- 1、技术沟通，初步判断问题电话,与客户进行初步沟通、了解并初步判断仪器所出现的故障问题。
- 2、签订维修协议由我公司向客户发送仪器维修协议，客户需如实填写内容并回传以便我司对仪器做进一步判断。
- 3、客户邮寄仪器客户可按照我司地址邮寄仪器，并将快递单拍照发送至您的专属客服进行备案。
- 4、详细诊断机器故障我司收到邮寄仪器后会对邮寄的仪器进行拍照并开箱检验，对仪器做进一步故障判断。
- 5、支付维修费用如客户仪器在保修期内，我司不收取任何维修费，如客户仪器在保修期外，我司会适当收取维修费。
- 6、邮寄仪器给客户我司将维修好的仪器按客户地址进行拍照并邮寄，自此虽维修协议终止，但我司将提供终身免费答疑及技术指导。
| Testo 340 烟气分析仪 | Testo350 烟气分析仪 | PMS尘埃粒子计数器 | TSI尘埃粒子计数器 | Lighthouse尘埃粒子计数器 | Metone尘埃粒子计数器 |
| HACH尘埃粒子计数器 | TSI气溶胶发生器 | ATI气溶胶发生器 | Palas气溶胶发生器 | Topas气溶胶发生器 | Palas静电中和器 |
| Topas静电中和器 | Grimm粒径谱仪 | TSI粒径谱仪 | Topas粒径谱仪 | Palas粒径谱仪 | TSI扫描电迁移率粒径谱仪 |
| HTV 甲醛检测仪 | HTV-M甲醛检测仪 | TVOC 检测仪维修 | Grimm扫描电迁移率粒径谱仪 | Palas扫描电迁移率粒径谱仪 | Brechtel扫描电迁移率粒径谱仪 |
| TSI 8530粉尘仪 | TSI 8532粉尘仪 | TSI 8533粉尘仪 | Rad7 氡检测仪 | TSI 8534粉尘仪 | Thermo PDR-1500粉尘仪 |
| ATI 2i光度计 | ATI气溶胶稀释器 | 风量罩 | 风速仪 | 空气品质检测仪 | EN779测试台改造 |
| Dustmate 粉尘仪 | TSI 8108大颗粒气溶胶发生器 | TSI 3450单分散气溶胶发生器 | 车身气密性检测设备 | 风管漏风量测试设备 | 凝聚核粒子计数器校准装置 |
| 粒子计数器校准装置 | 更多型号请咨询客服19mro@19mro.com |
相关商品