Masterflex 07551-70可连接仪器的控制软件，CD-ROM

Masterflex 可连接仪器的控制软件，CD-ROM

Masterflex Linkable Instrument Control Software, CD-ROM

最多可控制25 MASTERFLEX ^® L / S ^® 07551系列驱动器或科尔-帕默Servodyne搅拌机的，直接从您的电脑

接口的07551系列通过RS-232或USB连接的计算机兼容的驱动器

定制软件，以满足您的应用需求：配药，混合/稀释，流量比例，单/多坡度;程序每个泵自动化50步。

平衡的界面，让您免除了平衡，还具有重量比分配多个COM端口在您的PC上使用多个结余启用

记录选项让你登录在特定的时间间隔，在每个块结束时，或者在每次运行结束

符合21 CFR第11部分：密码保护和授权用户列表，文件加密只允许授权用户访问。

基于Windows ^®的软件有熟悉的下拉菜单和鼠标选择图标。

对于PC接口，通过RS-232端口和菊花链驱动器来驱动使用DB9 M / F电缆22050-54; PC接口，通过USB端口使用USB A / B型电缆22050-60。软件提供的CD-ROM格式兼容的Windows XP与Windows 95/98/NT/2000/XP被推荐为最佳性能。

Control up to 25 Masterflex^® L/S^® 07551-series drives or Cole-Parmer Servodyne mixers directly from your PC

Interface the 07551-series computer-compatible drives via either RS-232 or USB connection

Customize the software to meet your application needs: dispensing, mixing/diluting, flow proportioning, and single/multiple slope gradients; program each pump to automate up to 50 steps.

Balance interface allows you to dispense off of a balance and also features weight-ratio dispensing; use of multiple balances is enabled with multiple COM ports on your PC

Logging options let you log at specific intervals, at the end of each block, or at the end of each run

Complies with 21 CFR Part 11: password protection and authorized user list, file encryption permits authorized user access only.

Windows^®-based software has familiar pull down menus and mouse-selectable icons.

For PC interface via RS-232 port and for daisy-chaining drive to drive use DB9 M/F cable 22050-54; for PC interface via USB port use USB Type A/B cable 22050-60.

Software is supplied in CD-ROM format; compatible with Windows 95/98/NT/2000/XP; Windows XP is recommended for best performance.