瑞士Sensirion ASL1600-10热非侵入性低流量流量计，40至1000微升/分钟

瑞士Sensirion ASL1600-10热非侵入性低流量流量计，40至1000微升/分钟

纳米和微流测量精密实验室应用

分辨率可达500 PL/分钟

响应时间<50毫秒

这些液体质量流量计使超低液体质量流量快速和精确的测量，并与总的介质隔离，很少死体积，以及没有运动部件进行操作。该流量计检测到液体的质量流量，通过测量通过玻璃毛细管的管材料的热传递。在毛细管外的微芯片上的热优化膜的加热电阻器被保持高于环境温度。在毛细管内液体流动的情况下，温度分布的上游和下游被干扰，这种差异进行测量。 CMOSens®sensor技术结合使用的数字信号处理在一个CMOS芯片高精度的热传感器元件。此外，CMOSens传感器技术的数字智能与pc机、PLC等控制器的连接的数字化接口。

所有的测量数据完全校准，并通过内部微控制器来进行温度补偿。优良的耐化学性和生物相容性得到保障，并且处理介质只获取与所述直传感器的毛细管接触。典型应用该传感器包括精确液体的质量流量和体积测量为分析仪器，医疗器械，和过程控制。型号32611-00至-08校准的只有水。测量信号的优良的重复性仍维持为其他媒体，因而允许计算机或微控制器上后测量校正。模型32611-10被校准为IPA，但也可以用于其它烃类，如乙醇，丙酮，柴油，石油，醚和大多数其他媒体的可重复的测量结果，但是它不与水溶液工作。

包含的内容：

型号32611-00到-04：PC软件，2微米在线过滤器，OD360PEEK®毛细血管，RS-232数据线，AC适配器，用于110至230 VDC。型号32611-06和-08：PC软件，UNF10-32装修，RS-232数据线，AC适配器，用于110至230 VDC。型号32611-10：尾缆，接头1/8''OD塑料管材、倒刺和镥联接器。

Thermal Non-Invasive Low-Flow Flowmeters, 40 to 1000 µL/min

Nano-and micro-flow measurements for precision laboratory applications

Resolutions down to 500 pL/min

Response time < 50 ms

These liquid mass flowmeters enable extremely fast and accurate measurements of ultra-low liquid mass flows, and operate with total media isolation, very little dead volume, and no moving parts. The flowmeter detects liquid mass flow by measuring heat transfer through the tubing material of a glass capillary. On a microchip outside the capillary, a heating resistor on a thermally optimized membrane is kept above ambient temperature. In the presence of liquid flow inside the capillary, the temperature distribution upstream and downstream is disturbed—this difference is then measured. CMOSens^®sensor technology combines a high-precision thermal sensor element with digital signal processing on one single CMOS chip. In addition, the digital intelligence of the CMOSens sensor technology enables digital interfaces that permit an easy link with PCs, PLC, and other controllers.

All measurement data is fully calibrated and temperature compensated by means of an internal microcontroller. Excellent chemical resistance and bio-compatibility are ensured, and the process medium only gets in contact with the straight sensor capillary. Typical applications for this sensor include precise liquid mass flow and volume measurement for analytical instruments, medical devices, and process control. . Models 32611-00 to -08 are calibrated for water only. Superior repeatability of the measurement signal is still maintained for other media and thus allows after-measurement-correction on a computer or microcontroller. Model 32611-10 is calibrated for IPA only but can also be used for repeatable measurements of other hydrocarbons such as ethanol, acetone, diesel, petroleum, ether, and most other media; however it does not work with aqueous solutions.

What's Included:
Models 32611-00 to -04: PC software, 2 µm in-line filters, OD360 PEEK^® capillaries, RS-232 data cable, AC adapter for 110 to 230 VDC. Models 32611-06 and -08: PC software, UNF 10-32 fitting, RS-232 data cable, AC adapter for 110 to 230 VDC. Model 32611-10: pigtail cable, fittings for 1/8’’ OD plastic tubing, and barb and luer connectors.