Cole-Parmer 4307CP 2线探头双通道温度计

Cole-Parmer 4307CP 2线探头双通道温度计

同时监控两个区域 

显示日期和最小/最大温度发生时间 

双探头设计，非常适合监测温度在两个独立的区域或测量两个毗邻地区，以保证均匀性。非常适用于冷库，化工，医药等。两个通道记录的时间和最小和最大读数的时间，独立地监视用户可编程的高和低的警报。内置报警，提供温度读数超过预设的报警限值警报，声音警报就会响起，红色的LED会闪烁。如果读数返回到可接受的限度时，声音报警器将关闭，然而在LED继续闪烁，直到复位，表明在试验期间的警报停止。报警器是可编程的，以1°为单位。探头安装在3-1/2英尺（1.05 M）微型电缆允许的门关闭就可以了;探头和电缆都是潜水。VELCRO 品牌供应，磁条或使用倒装打开支架。 

型号94460-61是专为一般用途的应用程序。 

包含项目：制造尼龙搭扣和磁条，一节AAA碱性电池提供NIST可溯源校准报告。

Dual Channel Thermometer with 2 Wire Probes

Monitor two areas at the same time

Displays date and time when Min/Max temperatures occur

The dual probe design is perfect for monitoring temperature in two separate areas or measure two adjoined areas to insure uniformity. Ideal for cold storage, chemicals, pharmaceuticals, and more. The two channels records the date and time of the minimum and maximum readings, while independently monitoring user programmable high and low alarms. The built-in alarm provides an alert when the temperature readings exceed the pre-set alarm limits, an audible alert will sound and a red LED will flash. If the readings return to acceptable limits, the audible alarm will turn off however, the LED will continue to flash until reset to indicate that during the test period an alarm was reached. Alarm is programmable in 1° increments. Probe is attached to a 3-1/2-ft (1.05 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro™, magnetic strips, or use flip-open stand on benchtop.

Model 94460-61 is designed for general-purpose applications.
What's Included:
NIST-traceable calibration report supplied by the manufacture, Velcro® and magnetic strips, and one AAA alkaline battery.