Braycote 248润滑 1磅包装

 

描述

嘉实Braycote 248是一种琥珀色，柔软，脂状或蜡状的固体，它在加工部件上形成一个透明柔性的薄膜。它会发生聚合反应，长时间暴露在阳光下后变硬。

Braycote 248是专为保护加工，未上漆的金属表面免受室内的影响或在车间暴露六个月以上的时间。它特别适用于在储存或装运抗摩擦轴承。

应用

的raycote 248可通过加温到160 ° F到180 °F （ 71 ° C至82 ° C）范围内应用。它可以被刷涂或擦拭在室温时，其稠度类似于软油脂，或在高温下时，它类似的油。热喷涂应用，可用于保护大重量工件或者设备太大的面积。只有当被保护的金属表面清洁，干燥,去除铁锈，油污和氧化皮。

覆盖

Braycote 248的覆盖面将有很大的变化,根据应用和表面几何形状的方法。

Braycote 248可通过溶剂或蒸汽清洗除去。

包装

Braycote 248是400磅重桶装， 35磅桶和12 / 1磅情况下可用。

产品规格

Braycote 248符合规范要求，并符合MIL -C - 11796C ， 3类。本产品鉴定为北约编号：C- 627 。

 

Description

Castrol BraycoteTM 248 is an amber colored, soft, grease like or waxy solid, which forms a soft transparent, flexible film on applied parts. It will not polymerize or harden after long exposure to the sun.

Uses Braycote 248 is designed to protect machined, unpainted metal surfaces from the effects of indoor or shed exposure for

periods of six months or more. It is especially suitable for the preservation of anti-friction bearings in storage or shipment.

Application

Braycote 248 may be applied by dipping at temperatures from 160°F to 180°F (71°C to 82°C). It may be brushed or

swabbed on at room temperature when its consistency resembles a soft grease, or at elevated temperatures when it

resembles an oil. Hot spray applications can be used for protecting large pieces of equipment that are too large in size for dipping applications. Optimal performance can be achieved only when the metal surfaces to be protected are clean, dry

and free of rust, oil and mill scale.

Coverage

The coverage of Braycote 248 will widely vary dependent on the method of application and surface geometries.

Removal

Braycote 248 may be removed by solvent or steam cleaning.

Packaging

Braycote 248 is available in 400 pound drums, 35 pound pails and 12/1 pound cases.

Specifications

Braycote 248 meets the requirements of specification and is qualified to MIL-C-11796C, Class 3. This product is identified

by NATO Code: C-627.