嘉实多Brayco 1728润滑脂 15lbs

说明：

嘉实多Brayco 1728是光滑的，黄色的，半透明NLGI 2号润滑脂。它是基于一种低分子量全氟聚醚油和四氟乙烯胶凝剂。 Brayco 1728是不可燃的，化学的，对强酸和碱存在化学惰性，并且与氧化剂相容。嘉实多Fluoroclean ™ X100和嘉实Fluoroclean ™ HE可以用来消除这种润滑剂。请参阅数据表Fluoroclean ™ X100和Fluoroclean ™ HE了解有关这些产品的信息。

应用：

Brayco 1728 ，建议在非重要环境或者岗位中应用，这些应用具有腐蚀性化学品和氧化剂直接或间接接触,润滑剂相容性是首要关心的问题。 当暴露在浓缩的酸和碱，和氧气时,Brayco 1728是稳定的。全氟润滑脂，在一般情况下，由于其固有的化学惰性,表现出优异的储存期限。

温度范围：

-40 ° F至350 °F （ -40 ° C至177 °C ）

局限性：

Brayco 1728是相容的，在与传统的金属，塑料，弹性体和正常的工作条件。 Brayco 1728可以通过路易斯酸会受到不利影响，例如在高温下的氯化铝。铝，镁，钛或新暴露的摩擦表面可以在一定条件下与Brayco 1728反应。这种系统应彻底评估。表面必须彻底清洁干净，使用润滑脂以前，必须要使用有机防锈剂,以保证润滑。

去除油脂应用于表面多余的油脂：

该产品的组合物是小的PTFE颗粒（这将不会在任何情况下溶解）和全氟聚醚液体的混合物。我们已经发现，如果在从某些地方不再需要或想要去除油脂中的液体成分时候,嘉实多® Fluoroclean ™ HE是一种有效的溶剂配制的组合物和助剂。

包装：

Brayco 1728 15磅和1.75磅包装。

Description:

Castrol Brayco 1728 is a smooth, buttery, translucent NLGI #2 grease. It is based upon a low molecular weight perfluorinated polyether oil and a tetrafluoroethylene gelling agent. Brayco 1728 is nonflammable, chemically, chemically inert to strong acids and alkalies, and is oxidizer compatible. Castrol Fluoroclean™ X100 and Castrol Fluoroclean™ HE can be used to remove this lubricant. Refer to the data sheets for Fluoroclean™ X100 and Fluoroclean™ HE for information regarding these products.

Application:

Brayco 1728 is recommended for those light duty applications in which lubricant compatibility with aggressive chemicals and oxidants in direct or indirect contact is of primary concern. Brayco 1728 is stable when exposed to both concentrated acids and bases, and oxygen. Perfluorinated greases, in general, exhibit excellent shelf lives due to their intrinsic inertness.

Temperature Range:

-40°F to 350°F (-40°C to 177°C)

Limitations:

Brayco 1728 is compatible, under normal operating conditions with conventional metals, plastics, and elastomers. Brayco 1728 may be adversely affected by Lewis Acids such as aluminum chloride, at elevated temperatures. Newly exposed rubbing surfaces of aluminum, magnesium, or titanium may react with Brayco 1728 under certain conditions. Such systems should be thoroughly evaluated. Surfaces must be well cleaned of organic rust inhibitors prior to grease application to insure lubrication.

Removal of unwanted grease from grease applied surfaces:

The composition of this product is a mixture of small PTFE particles (which won't dissolve in anything) and a perfluorinated polyether liquid. We have found that Castrol® Fluoroclean™ HE is an effective solvent for the liquid component of the formulated composition and aids in the removal of the grease from places where it is no longer needed or wanted.

Packaging:

Brayco 1728 is available 15 pound pails and 1.75 lb cartridges.