Skipper Plus 水分测定仪 MO-940201

Moisture can cause peeling and blistering of applied finishes and treatments, newly applied finishes can fail prematurely if the wood it is applied to is not sufficiently dry. Hidden or trapped moisture can lead to mold and biological growth.

Skipper Plus 还可以用来检测泄漏和跟踪他们上下甲板的源头。

The Skipper Plus can be moved across the surface of the boat to moisture survey in a fast and thorough manner, detecting moisture non-destructively through paint and coatings on wood up to a depth of 1.25". The Skipper Plus can also be used to detect leaks and trace them to source both above and below decks.

The Skipper Plus Moisture Meter is Used for:

出现起泡之前早期检测

鉴别受损区域

除湿和修理船体监测

干前预涂，检查脱皮

Early detection before blistering appears

Identifying the affected area

Monitoring hull during de-humidification and repairs

Checking stripped or peeled areas for dryness prior to re-coating

木船无损检测和测量湿度，GRP（玻璃纤维增​​强塑料）船体，木质零件，部件，甲板等

针对不同的材料进行了表面水分的测试如硬木，玻璃钢。

深层渗透信号通过更多物质，以检测水分升高，而无需破坏或刺穿正在测试的材料

外部橡胶电极直接接触被测最佳灵敏度、重复性和更大的信号穿透深度的材料

用于木材的5〜30％的硬木读数以及0到100的GRP和其他材料的比较数值

大而明确，易于阅读显示屏提供的有效读数

持有允许用户“冻结”数据功能,当面部看不到水分测定仪不适合读取数据时，可以使用这一功能

高水分音频警告音，可以开启或关闭

在不使用时节省电池，自动电源切断开关“关”

确定水分渗透的玻璃纤维船体的存在

确认木船是否是干油漆或清漆前

赛艇如携带多过量水分检查

检查甲板和舱壁泄漏

起泡之前检查

确定水分受灾程度

船体除湿监测

预涂前检测

Non-destructive detection and measurement of moisture in wooden boats, GRP (Glass Reinforced Plastic) boat hulls, wooden parts, components, decks, etc.

Three measurement ranges optimized for testing of different materials such as hardwood, GRP and surface moisture

Deep signal penetration to detect elevated moisture through most covering and coating materials and deep into the core of composite hulls without having to damage or puncture the material being tested

External rubber electrodes in direct contact with material being tested for best sensitivity, repeatability and greater depth of signal penetration

Wide range of readings for wood of 5 to 30% on hardwood scale and 0 to 100 on comparative scale for GRP and other materials

Large, clear, easy to read display giving meaningful readings

Hold function enables user to "freeze" the reading, useful when taking readings in awkward places where the meter face may not be visible

High moisture audio warning tone that can be switched on or off

Automatic power cutoff switches "Off" when not in use to save Battery

Identify the presence of moisture osmosis in fiberglass hulls

Confirm if wooden boats are dry before painting or varnishing

Check if racing boats are carrying excess moisture weight

Trace deck and bulkhead leaks

Early detection before blistering appears

Identify extent of moisture affected area

Monitor hull during de-humidification

Check stripped areas prior to re-coating