Masterflex 07575-20 L / S数字处理驱动器与粉末涂层钢外壳，0.1至600转，115/230 VAC

Masterflex L / S数字处理驱动器与粉末涂层钢外壳，0.1至600转，115/230 VAC

Masterflex L/S Digital Process Drive with Powder-Coat Steel Housing, 0.1 to 600 RPM, 115/230 VAC

流体输送，分配，实验室和计量应用，流程和冲洗环境的理想选择

外壳是完全密封的IP66和NEMA 4X额定

直冲式驱动器是易清洁，耐常用的清洗和消毒液，仅需要冲洗干净

无刷免维护电机速度控制精度±0.1％，6000-1调节比

全遥控功能可简单地集成到自动化流程

流速：0.006至3400毫升/分钟（至54 GPH）L/S油管。流量取决于驱动器转速和泵管尺寸。

图形液晶显示四种工作模式，连续运行，定时分配，复制分配量分配。

连续查看泵

菜单驱动的界面，可以选择七种语言，编程及操作

免除：体积毫升（0.001〜99999毫升），升和加仑;复制1到9,999分配周期;或SEC时间的时间间隔，每次分配周期（1秒到99小时59分59秒）

通过密封圆形连接器驱动器上远程控制：

-可扩展速度控制输入0至20 mA，4至20 mA或0〜10 V; 

-抽水方向需要集电极开路或触点闭合; 

--Start/stop/purge要求打开电极开路或触点闭合; 

-转速计输出可扩展0至20 mA，4至20 mA，0〜10 V，集电极开路

型号07575-20具有粉末涂层钢板外壳。使用该驱动器的过程中，不锈钢制造、水处理应用程序不是一个关键需求。

这些精密驱动器提供模拟远程控制选项和简单的编程是自动化过程应用的理想选择。驱动器具有可编程分配区间，允许您设置延迟分配周期之间方便、自动分配。程序校准，确保分配和显示精度驱动器每尺寸油管存储校准值

驱动程序通过简单的键盘膜，键盘锁定/解锁功能保护设置。电机是可逆的，所以您可以清除之前或之后，在任一方向的泵和泵液管

包含： 6英尺（1.8米）的线与IEC 22 320/CEE的连接器耦合器;水密线连接。插头/电源线驱动器随附在订货时指定目的地国家。

Ideal for fluid transfer, dispensing, and metering applications in laboratory, process and wash-down environments

Housings are completely sealed—IP66 and NEMA 4X rated

Washdown drive is easy-to-clean and resistant to commonly used cleaning and sanitizing solutions—simply hose down to clean

Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio

Full remote control capabilities allow easy integration into automated processes

Flow rate: 0.006 to 3400 mL/min (up to 54 GPH) with L/S tubing. Flow rate depends on drive rpm and tubing size.

Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually

Menu-driven interface lets you select one of seven languages for programming and operation

Dispense by: Volume—in milliliters (0.001 to 99999 mL), liters, and gallons; Copy—1 to 9,999 dispense cycles; or SEC—time interval between each dispense cycle (1 sec to 99 hr, 59 min, 59 sec)

Remote control via sealed circular connector on drive:

--Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V; 

--Pumping direction requires open collector or contact closure; 

--Start/stop/purge requires open collector or contact closure; 

--Tachometer output scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V, open collector

Model 07575-20 features a powder coated steel housing. Use this drive in process, manufacturing, and water-treatment applications where stainless steel is not a critical requirement.

These precision drives offer analog remote control options and simple programming—ideal for automated process applications. Drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size.

Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings. Motor is reversible so you can purge tubing before or after pumping and pump fluid in either direction.

What's Included:

Six-foot (1.8-meter) line cord with IEC 320/CEE 22 connector coupler; watertight cord connection. Specify destination country when ordering; drive is shipped with country-specific plug/cord set.