Masterflex 77600-82 I / P高效泵头ATEX区域2，SS转子

Masterflex I / P高效泵头ATEX区域2，SS转子

Masterflex I/P High-Performance pump head for ATEX Zone 2; SS rotor

流速最高，压力和吸力性能最佳的I/P泵头

ATEX Zone 2认证泵头额定EEx II 3 G C II C T6

使用“附件”中列出的适配器安装泵头，适合电机ATEX Zone 2的应用

聚酯和不锈钢（SS）设计可经受艰苦环境使用

通用安装配置，可安装管道的顶部或侧面灵活设置

C形设计允许泵管于泵压头同侧进入和进出，便于连接管的入口和出口

这种重型三辊泵头产生流速达17 LPM高于任何I/P泵头，非常适于工业加工和生产应用需要单管道泵头。简单安装，它接受Masterflex I/P高性能精密泵管产生的压力更大，增强泵对粘性流体的抽吸性能，管寿命更长。可调泵管持具确保泵管牢固，防止泵头活动。

I/P高性能泵头是兼容I/P驱动器接受两个或两个以上的泵头。接收两泵头驱动器有足够的扭矩来运行泵头即使在困难的条件下，如高背压。

注：高性能泵头是没有堆叠的。

包含：安装硬件，20“（51厘米）长硅胶泵管，可更换的柄脚开机运行安静，使用寿命长

Highest flow rates, best pressure and suction performance of any I/P pump head

ATEX Zone 2 approved pump head is rated to EEx II 3 G c II C T6

Use the adapters listed under "Accessories" to mount this pump head to an appropriate motor for ATEX Zone 2 applications

Stainless steel and polyester construction withstands tough process environments

Versatile mounting configurations—mount with tubing exiting to the top or side for flexible setup

C-shaped design allows tubing to enter and exit the same side of the pump head

Ideal for industrial process and production applications requiring a single pump head, this heavy-duty three-roller pump head produces flow rates up to 17 LPM— the highest of any I/P pump head. Simple to load, it accepts Masterflex I/P high-performance precision tubing for greater pressure generation and suction lift, enhanced ability to pump viscous fluids, and longer tubing life than precision tubing. Adjustable tubing retenion holds tubing securely in place and prevents movement while in the head.

The I/P High-Performance pump head is compatible with I/P drives that accept two or more pump heads. Drives that accept two heads have enough torque to run pump head even under difficult conditions such as high back pressure.

Note: Pump head is not stackable.

What's Included:

mounting hardware, a 20" (51 cm) length of silicone pump tubing, and replaceable tang boot for quiet operation and long service life.