Masterflex 77240-10 L / S结构紧凑，变速泵。双通道，115/230 VAC

Masterflex L / S结构紧凑，变速泵。双通道，115/230 VAC

Masterflex L/S compact, variable-speed pump. Dual-channel, 115/230 VAC

泵整体磁头提供可重复的低流速迅速设置

流速为0.8〜105毫升/分钟，这取决于驱动器转速和泵管尺寸。

两站管套很容易加载，不需要闭塞或张力调整

独立的单圈速度控制和转向泵时，正向/停止/反向切换保持速度设定开/关

通过泵后触点闭合远程启动/停止

双通道模式提供了两个独立的通道流同步

双通道模式接受L/S ® 13和L/S 14两管套

这种小巧型，可堆叠的泵为耐用的不锈钢外壳，夹为环氧基涂层。铝阳极氧化膜阻塞床波动快速装载两站管套。广泛闭塞角度防止流体回流到额定压力管。MAX按钮运行电机全转速或冲洗管。自润滑热塑性聚酯（Ertalyte ® TX）滚筒低摩擦，长时间耐磨，运行平稳，寿命长。

包括：双电压（115/230 VAC）台式电源与IEC320/CEE22插座的。泵与附带线/插头组件运输到指定目地国

Pump with integral head delivers repeatable low flow rates with quick set up

Flow rate of 0.8 to 105 mL/min—depending on drive rpm and tubing size.

Two-stop tube sets are easy to load with no occlusion or tension adjustment

Separate single-turn speed control and forward/off/reverse switch—maintain speed setting when turning pump on/off

Remote start/stop via contact closure on back of pump

Dual-channel model delivers synchronous flow from two separate channels

Dual-channel model accepts L/S® 13 and L/S 14 two-stop tubing sets

This compact, stackable pump features a durable steel housing with chip resistant epoxy-based paint. The anodized aluminum occlusion bed swings open for quick loading of the two-stop tube sets. Wide occlusion angle prevents fluid backflow up to the rated pressure of the tubing. MAX button runs motor at full rpm to rapidly prime or flush tubing. Self-lubricating thermoplastic polyester (Ertalyte®TX) rollers are low-friction and long wearing for smooth operation and long life.

What's included: dual-voltage (115/230 VAC) benchtop power supply with IEC320/CEE22 socket. Pump is shipped with cord/plug assembly specific to country of destination.