Red Lion IAMS0001 信号调节器

Red Lion IAMS0001 信号调节器

模块可被编程超过100输入/输出配置组合！

通用输入，程序，毫安直流，直流电压，TC，RTD，电位器，线性电阻

通用电源，21.6〜253 VAC/19.2至300 VDC

3路隔离（电源/信号/输出）

选择设定值和/或模拟输出模式

IAMS-通用信号调理器，无与伦比的能力，为用户提供了极大的灵活性。作为信号调理器，提供完整的隔离和转换功能，以满足任何应用程序。通用输入接受过程，直流电流，直流电压，热电偶，热电阻，电位器，线性电阻信号，使模块可以连接到最常见的传感器。双A型继电器设定模式具有双设定值控制能力。模拟模式具有转播模拟信号功能。第三模式，同时提供模拟控制能力。电源也普遍接受21.6到253伏/ 19.2 - 300 VDC电源。添加可选编程模块，本机很容易通过菜单编程。该模块不用时，也可显示IAMS具有超过100个的组合输入到输出配置。输入特定的终端允许的各种信号和传感器连接到该机，而输入范围和分辨率调整输入编程循环。菜单式编程-使用PGMMOD编程模块，用户可快速和容易设置。该模块所需程序是IAMS。不过，如果你使用多于一个 IAMS，只有一个编程模块是必需的。该模块可以存储编程从一个单位，并加载到第二单元设置时间减少为多个装置。当没有被用于编程的编程模块，它可以显示输入参数，就像一个面板仪表。机体整体满量程精度比例超过0.1％通常取决于选择的范围。基于微处理器的设计方便字段扩展和机载E2PROM存储值以备将来之需所有单位来工厂预校准的所有输入和输出范围。工厂或自定义字段缩放可选择高级编程循环。如需，IAMS可工厂重新调整。

Modules that can be programmed for over 100 combinations of input/output configurations!

Universal input, process, mA DC, VDC, TC, RTD, Potentiometer, and linear resistance

Universal power supply, 21.6 to 253 VAC/19.2 to 300 VDC

3-way isolation (power/signal/output)

Choose setpoints and/or analog output models

The IAMS — Universal Signal Conditioners unmatched capability provides users the ultimate in flexibility. As a signal conditioner, the unit provides complete isolation and conversion capability to satisfy almost any application. The Universal Input accepts Process, DC Current, DC Voltage, Thermocouples, RTDs, Potentiometers, and Linear Resistance signals allowing the module to be connected to most common sensors. The setpoint model allows dual setpoint control capability through dual Form A relays. The analog model provides a retransmitted analog signal. A third model provides both analog and control capability. The power supply is also universal, accepting 21.6 to 253 VAC/19.2 to 300 VDC as its power source. Add the optional programming module and the unit is easily programmed through menu style programming. The module can also be used to provide a display of the process variable when it is not being used for programming.

The IAMS features well er 100 combinations of inputs to outputs configurations. Input specific terminals allow for the various signals and sensors to be connected to the unit while the input ranges and resolutions are adjusted in the input programming loop of the unit. The menu style programming allows the user quick and easy set-up by using the PGMMOD, programming module. The module is required to program the IAMS. However, if you are using more than one IAMS, only one programming module is required. The module can store programming from one unit and load it to a second unit reducing set-up time for multiple installations. When the programming module is not being used for programming, it can indicate the input parameters, just like a panel meter.

The unit’s overall full scale accuracy typically exceeds 0.1 % depending on the range selection and scaling. The microprocessor based design provides ease of field scaling and the onboard E2PROM stores scaling values for future recall. All units come factory precalibrated for all input and output ranges. Factory or custom field scaling can be selected in the Advanced programming loop. The

IAMS can be factory recalibrated in the field if desired.